[1] Weber, W., Uber die specifische Warme fester Korper insbesondere der Metalle, Ann d. Physik u. Chemie, vol. 96, pp. 177-213, 1830.

[2] Thomson, W., "On the Dynamical Theory of Heat", Trans. Roy. Soc., vol. 20, pp. 261-283, 1853.

[3] Thomson, W., "On the Thermoelastic, Thermomagnetic and Pyro-electric Properties of Matter", Phil. Mag., vol. 5, pp. 4-27, 1878.

[4] Compton, K.T., Webster, D. B., "Temperature Changes Accompanying the Adiabatic Compression of Steel. Verification of W. Thomson's Theory to a Very High Accuracy", Phys. Rev., vol. 5, pp. 159-166, 1915.

[5] Ferren, W. S., Taylor, G. I., "The Heat Developed during Plastic Extension of Metals", Proc. Roy. Soc., vol. 107, pp. 422, 1925.

[6] Tamman, G. and Warrentrup, H., "Die Temperaturanderungen Beim recken von Metallstaben", Z. Matallk., vol. 29, pp. 84, 1937.

[7] Zener, C., "Internal Friction in Solids I Theory of Internal Friction in Reeds", Phys. Rev., vol. 52, pp. 230-235, 1937.

[8] Zener, C., "Internal Friction in Solids II General Theory of Thermoelastic Internal Friction", Phys. Rev., vol. 53, pp. 90-99, 1938.

[9] Zener, C., "Internal Friction in Solids V General Theory of Macroscopic Eddy Currents", Phys. Rev., vol. 53, pp. 1010-1013, 1938.

[10] Zener, C., "Internal Friction in Solids IV Relation between Cold Work and Internal Friction", Phys. Rev., vol. 53, pp. 582-586, 1938.

[11] Biot , M.A., "General Theory of 3-D Consolidation", J. Appl. Phys., vol. 12, pp. 155-164, 1941.

[12] McAdams, W.H., Heat Transmission, McGraw-Hill, vol. 2, pp. Section on radiation, 1942.

[13] Zener, C., Elasticity and Anelasticity of Metals, University of Chicago Press, 1948.

[14] Rocca, R. and Bever, M. B., "TheThermoelastic Effect in Iron and Nickel (As a Function of Temperature), Trans. AIME., vol. 188, pp. 327-333, 1950.

[15] Timoshenko, S. and Goodier, J., Theory of Elasticity, McGraw-Hill, 1951.

[16] Biot, M. A., "On Anisotropic Viscoelasticity", J. Appl. Phys., vol. 25, pp. 1385-1391, 1954.

[17] Biot, M. A., "Irreversible Thermodynamics with Application to Viscoelasticity", Phys. Rev., vol. 97, pp. 1463-1469, 1955.

[18] Biot, M. A., "Plasticity and Consolidation in a Porous Anisotropic Solid", J. Appl. Phys., vol. 26, pp. 182-185, 1955.

[19] Biot, M. A., "Thermoelasticity and Irreversible Thermodynamics", J. Appl. Phys., vol. 27, pp. 240-253, 1956.

[20] Rosenfield, A. R. and Averbach, B. L., "Effect of Stress on the Expansion Coefficient", J. Appl. Phys., vol. 27, pp. 154-156, 1956.

[21] Deresiewicz, H., "Selections of the Equations of Thermoelasticity", Proc. 3rd US Cong. on Appl. Mech., pp. 287-291, 1958.

[22] Carslaw, H. S. and Jaeger, J. C., "Conduction of Heat in Solids", Clarendon Press, Oxford, vol. 2nd ed., pp. Section on radiation, 1959.

[23] Chadwick, P., "Thermoelasticity - the Dynamical Theory, North-Holland Publishing Co., 1960.

[24] Todhunter, I. and Pearson, K., "A History of the Theory of Elasticity and the Strength of Materials", Dover Publications, 1960.

[25] Boley, B. A. and Tolins, I. S., "Transient Coupled Thermoelastic Boundary Value Problems in the Half Space", J. Appl. Mech., pp. 637, 1962.

[26] Dillon, O. W., "A Non-linear Thernoelastic Theory", J. Mech. Phys. Solids, vol. 10, pp. 123-131, 1962.

[27] Dillon, O. W., "An Experimental Study of the Heat Generated during Torsional Oscillations", J. Mech. Phys. Solids, vol. 10, pp. 235-244, 1962.

[28] Deresiewicz, H., "On the Transmission of Thermoelastic Plane Waves Across a Plane Boundary", J. Mech. Phys. Solids, vol. 11, pp. 35-39, 1963.

[29] Dillon, O. W., "Coupled Thermoplasticity", J. Mech. Phys. Solids, vol. 11, pp. 21-33, 1963.

[30] Soler, A. I. and Brull, M. A., "On the Solution to Transient Coupled Thermoelastic Problems by Pertubation Techniques", J. Appl. Mech., pp. 389, 1965.

[31] Dillon, O. W. and Taucher, T. R., "The Experimental Technique for Observing the Temperatures to the Coupled Thermoelastic Effect", Int. J. Solid Structures, vol. 2, pp. 385-391, 1966.

[32] Belgen, M. H., "Infrared Radiometric Stress Instrumental Application Range Study", NASA Report CR-1067, 1967.

[33] Belgen, M. H., "Structural Stress Measurements with an Infrared Radiometer", ISA, Trans., vol. 6, 1967.

[34] Belgen, M. H., "Infrared Radiometric Stress Instrumentation Application Range Study", NASA Report CR-1067, 1967.

[35] Bever, M. B., Holt, D. L. and Titchenor, A. L., "The Stored Energy of Cold Work", Prog. in Mat. Sci., pp. 17, 1973.

[36] Cagnasso, A., Gavent, G., Jullien, Y., Almaric, R., "Applications de la Thermovision a la Mecaniqur Vibratoire", Rev. Acoust, vol. 39, pp. 269, 1976.

[37] Mountain, D. S. and Webber, J. M. B., "Stress Pattern analysis by Thermal Emission (SPATE)", Proc. Soc. Photo-opt. Inst. Engrs., vol. 164, pp. 189-196, 1978.

[38] Nayroles, B., Blanc, R. H., Bouc, R., "Application de la Radiometrie Infrarouge a L'etude des Structures Mecaniques", Deleg. Gener. Rech. Sci. Tech., vol. 76.7, pp. 1854, 1978.

[39] Nayroles, B. and Giacommetti, E., "Application de la Radiometrie Infrarouge a L'etude des Structures Mecaniques", Deleg. Gener. Rech. Sci. Tech., vol. 76.7, pp. 1854, 1978.

[40] Jordan, E. H. and Sandor, B. I., "Stress Analysis from Temperature Data", J. of Testing and Evaluation, vol. 6, pp. 325-331, 1978, Nov.

[41] Blanc, R. H. and Giacommetti, E., "Infrared Stroboscopy-a Method for the Study of Thermomechanical Behaviour of Materials and Structures at High Rates of Strain", Int. J. Solid Structs., vol. 17, pp. 531-540, 1981.

[42] Nayroles, B. Bouc, R., Gaumon, H., Chezeaux, T. C. and Giacommetti, E., "Telethermographie Infrarouge...Mecanique des Structures", Int. J. Eng. Sci., 1981.

[43] Baker, L. R. and Webber, J. M. B., "Thermoelastic Stress Analysis", Optica Acta, vol. 29, pp. 555-563, 1982.

[44] Cox, L. J., Holbourn, P. E., Oliver, D. E. and Webber, J. M. B., "Stress Analysis of Complex Structures Using the Thermoelastic Effect", VDI-Bericht, pp. 139-165, 1982.

[45] Cox, L. J., Holbourn, P. E., Oliver, D. E. and Webber, J. M. B., "Stress Analysis of Complex Structures Using the Thermo-elastic Effects", Proc. 7th Int. Conf. on Exptl. Stress Anal. Haifa, Israel, pp. 538-544, 1982.

[46] Heyman, J. S. and Chern, E. J., "Ultrasonic Measurements of Axial Stress", J. Testing and Evaluation, vol. 10, pp. 202-211, 1982.

[47] Oliver, D. E., Razdan, D. and White, M.T., "Structural Design Assessment Using Thermoelastic Stress Analysis (TSA)", Proc, Brit. Soc. Strain Measurement/Royal Aeronaut. Soc. Joint Conf., 1982.

[48] Oliver, D. E., Webber, J. M. B., Stanley, P., "The Use of Sensitive Temperature Transducers to Produce Stress Maps of Cyclically Loaded Structures", Proc. SESA Spring Meeting , Cleveland, Ohio, 1983, May.

[49] Stanley, P. and Chan, W. K., "The Thermoelastic effect for Stress Analysis", Report No. 2 , University of Manchester, Dept. of Eng., Research Report, vol. 2, 1983, Nov. U. K.

[50] Berry, D. J. and Owens, R. H., "Mapping Mechanical Stresses to Validate Designs", Proc. 6th Annual Design Eng. Conf., 1983, Oct.

[51] Copley, D. W., "Thermoelastic Stress Analysis in the Vibration Testing of Aero Engine Components", Proc. Brit. Soc. Strain Measurement Conf., 1983, Sept.

[52] Berry, D. J. and Owens, R. H., "Optimisation and Validation of Designs Using Full-field Stress Mapping Techniques", Proc. SEECO '84 Conf., 1984, Apr. 5-6.

[53] Oliver, D. E. and Webber, J. M. B., "Absolute Calibration of the SPATE Technique for Non-contracting Stress Measurement", Proc. Vth Int. Cong. on Exptl. Mechs., pp. 539-546, 1984, June 10-15.

[54] Sevenhuijsen, P. J., "Photonics for Deformations", Proc. Vth Int. Cong. on Exptl. Mechs., 1984, June 10-15.

[55] Saul, R. S., "Technique and Applications of Stress Pattern Analysis by Measurement of Thermoelastic Emission", Brit. Soc. Strain Measurement, Spring Meeting, 1984, May 5.

[56] Rowe, W. J., "Materials Characterisation by Thermographic Imaging", Proc. SPIE Int. Conf. on Thermal Infrared Sensing for Diagnostic Control, 1984, Nov. 5-8.

[57] Reuter, W. and Berry, D. J., "Mapping Mechanical Stresses to Validate Designs", Int. FEM-Congress, 1984, Nov. 19-20.

[58] Burdekin, F. M., "Use of SPATE Technique on Welded Joints", 1st Int. Conf. Stress Anal. Thermoelastic Tech., London, 1984, Nov. 27-28.

[59] Copley, D. W., "Stress Pattern Analysis of Coarse Grain Titanium Specimens", 1st Int. Conf. on Stress Anal. by Thermoelastic Tech., 1984, Nov. 27-28.

[60] Cummings, W. M. and Harwood, N., "Thermoelastic Stress Analysis under Broadband Random Loading", 1st Int. Conf. Stress Anal. Thermoelastic Tech., London, 1984, Nov. 27-28.

[61] Duncan, J. L. and Cummings, W. M., "Thermoelastic Stress Analysis of Fresh Bone", 1st Int. Conf. Stress Anal. Thermoelastic Tech., London, 1984, Nov. 27-28.

[62] Nishimura, M., Yuasa, M. and Suzuki, K., "Measurement of Stress Concentration in Structures", 1st Int. Conf. Stress Anal. Thermoelastic Tech., London, 1984, Nov. 27-28.

[63] Razdan, D., Fry, K. and Lewis, J. H., "Evaluation of a Railway Axlebox for Frieght Application", 1st Int. Conf. Stress Anal. Thermoelastic Tech., London, 1984, Nov. 27-28.

[64] Stanley, P. and Chan, W. K., "Thermoelastic Stress Studies of Model Pressure Vessel and Cylindrical Shells", 1st Int. Conf. Stress Anal. Thermoelastic Tech., 1984, Nov. 27-28.

[65] Trufitt, M. and Cooper, G. P., "Determination of Stress in a Model and a Full-size Antenna Support Pedestal", 1st Int. Conf. Stress Anal. Thermoelastic Tech., London, 1984, Nov. 27-28.

[66] Webber, J. M. B., "Principles of SPATE (Stress Patterns Analysis by Thermal Emission) Technique for Full-field Stress Analysis", 1st Int. Conf. on Stress Anal. by Thermoelastic Tech., London, 1984, Nov. 27-28.

[67] Woodward, R. J., Cunninghame, J. R. and Gresty, J. L., "Application of Thermoelastic Stress Analysis to Concrete", 1st Int. Conf. Stress Anal. Thermoelastic Tech., London, 1984, Nov. 27-28.

[68] Imberdis, D. G. and Berry, D. J., "Analyse des Contraintes par Thermographite Infrarouge", Journees d'information en Extensometrie, Versailles, 1984, Oct. 24-25.

[69] Berra, M., Fatticcioni, A., Morabito, P., "Un Metodo per la Determinazione del Coefficiente di Dilatazione Temica Lineare Attraverso Misure di Emissione Termica", Atti del XII Convegno Nazionale, 1984, Sept. 24-27.

[70] Harwood, N., "Relative Assessment of Full-field Experimental Stress Analysis Techniques", Strain, vol. 21, pp. 119-121, 1985.

[71] Harwood, N. and Cummings, W. M., "Calibration and Qualitative Assessment of the SPATE Measurement System, Report DE/1/85, National Engineering Laboratory, 1985.

[72] Stanley, P. and Chan, W. K., "Quantitative Stress Analysis by Means of the Thermoelastic Effect", J. Strain Analysis, vol. 20, pp. 129-137, 1985.

[73] Cummings, W. M. and Harwood, N., "Design Analysis of Engineering Structures Using SPATE", First Scottish Design Engng. Conf., 1985, Apr.

[74] Cumming, W. M., "Thermoelastic Stress Analysis", Engineering, vol. Technical File 132, 1985, Feb.

[75] Webber, W. R. S., "Integrators, Time Constants, and Spate Measurements", , 1985, July.

[76] Archer, R. and Razdan, D., "Stress Analysis of Railway Coach Body Panels by Means of the SPATE Technique", Proc. SEM Spring Conf. on Exp. Mechs., pp. 740-746, 1985, June.

[77] Cummings, W. M. and Harwood, N., "Thermoelastic Stress Analysis under Broad-band Random Loading", Proc. SEM Spring Conf. on Exp. Mechs., pp. 844-850, 1985, June.

[78] Sarihan, V., Oliver, D. and Russell, S. S., "Thermoelastic Stress Analysis of an Automobile Engine Connecting Rod", Proc. SEM Spring Conf. on Exp. Mechs., pp. 729-739, 1985, June.

[79] Stanley, P. and Chan, W. K., "'SPATE' Studies of the Stress Distributions in Steel Plates and Rings under In-plane Loading", Proc. SEM Spring Conf. on Exp. Mechs., pp. 747-757, 1985, June.

[80] Rowe, W. J., "Thermal Conductivity Measurement with a Scanning Radiometer", Proc. SEM Spring Conf. on Exp. Mechs., pp. 723-728, 1985, June 9-14.

[81] Jordan, E. H., "Notch-root Plastic Response by Temperature Measurement", Experimental Mechanics, vol. 25, pp. 24-31, 1985, Mar.

[82] Angerer, S. and Kolitsch, C., "Thermoelastic Stress Analysis for Testing of Motor-Vehicle-Components", Proc. 9th GESA/VDI-Bericht Symp., pp. 265-277, 1985, May 9-10.

[83] Owens, R. H. and Reuter, W., "Beruhrungslose Messung Dynamische Spannungen", Proc. 9th GESA Symposium, 1985, May 9-10.

[84] Berry, D. J. and Everett, G. M., "Materials Testing Using Non-Contacting Stress Mapping Techniques", Materials in Eng. Conf., 1985, Nov. 5-7.

[85] Everett, G. M. and Berry, D. J., "The Use of the Thermoelastic Effect to Determine Mechanical Stresses in Components Subjected to Dynamic Loading", Int. Automotive Technology Cong., 1985, Oct. 29-Nov. 1.

[86] Oliver, D. E., Reuter, W. and Everett, G. M., "Non-contacting Measurement of Stresses in Engineering Structures", Int. Symposium on Automotive Technology and Automation, 1985, Sept. 23-27.

[87] Beghi, M. G., Bottani, C. E. and Caglioti, G., "Irreversible Thermodynamics of Metals under Stress", Res Mechanica, 1986.

[88] Beghi, M. G., Bottani, C. E. and Fazzi, A., "A Spectral Analyser for the Thermomechanical Response of Solids to Low-frequency Dynamic Loads", J. Phys. E., 1986.

[89] Harwood, N. and Cummings, W. M., "Application of Thermoelastic Stress Analysis", Strain, vol. 22, pp. 7-12, 1986.

[90] Harwood, N. and Cummings, W. M., "The Theoretical Basis of the Use of Random Excitation Signals for Thermoelastic Stress Analysis", 2nd Int. Conf. on Stress Anal. by Thermoelastic Tech., 1986.

[91] Machin, A. S. and Sparrow, J. G., "The SPATE 8000 Thermoelastic Stress Analyser", Non-destructive Testing, vol. 26, pp. 360-370, 1986.

[92] Oliver, D. E., "Stress Pattern Analysis by Thermal Emission", Chapter 14, Handbook of Experimental Mechanics, 1986.

[93] Stanley, P. and Chan, W. K., "SPATE Studies of the Stress Distributions in Steel Plates and Rings under In-plane Loading", Experimental Mechanics, vol. 26, pp. 360-370, 1986.

[94] Stanley, P. and Chan, W. K., "Stress Pattern Analysis by Thermal Emission: Confirmation of Theory and Illustrative Examples", Proc. 9th Cong. on Material Testing, 1986.

[95] Stanley, P. and Chan, W. K., "A Thermoelastic Stress Evaluation of a Proposed KII Specimen", "2nd Int. Conf. on Stress Anal. by Thermoelastic Tech.", 1986.

[96] Stanley, P. and Chan, W. K., "Mode II Crack Studies Using the SPATE technique", Proc. SEM Spring Conf. on Exp. Mechs., pp. 916-923, 1986.

[97] Enke, N., "Theory and Application of Stress Analysis by Infrared Thermography", , 1986, Apr.

[98] Stanley, P. and Chan, W. K., "Stress Studies in Composite Cylinders Based on Measurement of Infra-red Emissions due to Cyclic Loading", Proc. Int. Symp. on Mechs. of Polymer Composites, pp. 266-273, 1986, Apr.

[99] Sandor, B. I., "Nondestructive Testing and Evaluation by Differential Infrared Emissions", Proc. Conf. on Nondestructive Testing and Evaluation of Advanced Materials and Composites, pp. 217-228, 1986, Aug.

[100] Oliver, D. E., Webber, W. R. S. and Gilby, J., "Non-contact Stress Pattern Analysis of Structures Loaded with Complex Waveforms", Proc. of the Fourth Int. Modal Anal. Conf., 1986, Feb.

[101] Cummings, W. M. and Harwood, N., "Development of Techniques for the Thermoelastic Stress Analysis of Structures Operating in Service", SEM Conf. on Exp. Mechs., 1986, June.

[102] Gucfa, A., Loehr, M. and Sherwood, M., "Calibration Methods for an Infrared Thermoelastic Stress Analyzer", Soc. for Exp. Mech. Conf., 1986, June.

[103] Madakacherry, J. M., Murphy, M. and Aiken, R., "Thermoelastic Stress Analysis of an Automobile Engine", Soc. of Exp. Mechs. Conf., pp. 931-938, 1986, June.

[104] Xian, X., Zheng, W. and Hu, W., "Evaluation of the Damage of Carbon/Epoxy Composite Laminates under Static and Fatigue Loading by Thermographic Analyses", Proc. of Int. Symposium on Composite Materials and Structures, pp. 710-716, 1986, June 10-13.

[105] Harwood, N. and Cummings, W. M., "Use of the Thermoelastic Technique in Experimental Stress Analysis", Proc. VIIIth Int. Cong. on Exptl. Stress Anal., pp. 489-498, 1986, May 12-16.

[106] Kizler, W., "Opportunities and Limitations of Thermoelastic Stress Analysis", Proc. VIIIth Int. Conf. on Exptl. Stress Anal., pp. 499-506, 1986, May 12-16.

[107] McKelvie, J., "Some Practical Limits to the Applicabilty of the Thermoelastic Effect", Proc. VIIIth Int. Conf. on Exp. Stress Anal., pp. 507-518, 1986, May 12-16.

[108] Oliver, D. E., Webber, W. R. S., Joseph, G. and Gilby, J., "Recent Development of the SPATE Technique for Measuring Stress in Structures Loaded with Complex Waveforms", Proc. VIIIth Int. conf on Exptl. Stress Anal., pp. 465-478, 1986, May 12-16.

[109] Stanley, P. and Chan, W. K., "A New Experimental Stress Analysis Technique of Wide Application", , pp. 479-487, 1986, May 12-16.

[110] Stanley, P. and Chan, W. K., "The Determination of Stress Intensity Factors and Crack-tip Velocities from Thermoelastic Infra-red Emissions", Proc. Int. Conf. on Fatigue of Eng. Matls. and Structures, vol. 1, pp. 105-114, 1986, Sept.

[111] Valle, G., "Rank Precision Industries-Milan Analisi di Stress con il Metodo Della Termoelasticita", 14 Convegno Nazionale Dell, 1986, Sept.

[112] Kageyama, K., Ueki, K. and Kikuchi, M., "Application of Thermoelastic Stress Analysis to FRP", Prep. 32th Nat. Conf. FRP, pp. 52-57, 1987.

[113] Wong, A. K., Jones, R. and Sparrow, J. G., "Thermoelastic Constant or Thermoelastic Parameter?", J. Phys. Chem. Solids, vol. 48, pp. 749-753, 1987.

[114] Sandor, B. I., Lohr, D. T. and Schmid, K. C., "Nondestructive Testing Using Differential Infrared Thermography", Materials Evaluation, vol. 45, pp. 392-395, 1987, Apr.

[115] Valle, G., "L'Analisi Delle Sollecitazioni con il Metodo della Termoelasticita Progettare", , 1987, Apr.

[116] Rowlands, R. E., "Photomechanical Analysis of Composite and Other Materials", SPIE, 1987, Aug.

[117] Vanderby, R. et al, "Thermoelastic Analysis of the Proxial Canine Femur", Proc. 1987 Advances in Bioengineering, 1987, Dec.

[118] Machin, A. S., Sparrow, J. G. and Stimson, M. G., "Mean Stress Dependence of the Thermoelastic Constant., Strain, vol. 23, pp. 27-30, 1987, Feb.

[119] Bream, R. G., Gasper, B. C. and Lloyd, B. E., "Operational Experiences of the SPATE 8000 Dynamic Stress Measurement System", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[120] Bream, R. G., Gasper, B. C., Lloyd, B. E., Page, S. W. J., "The SPATE 8000 Thermoelastic Camera for Dynamic Stress Measurement on Nuclear Plant Components", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[121] Bream, R. G., Gasper, B. C., Page, S. W. J. and Lloyd, B. E., "Operational Experiences with the SPATE 8000 Stress Measurement System", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[122] Brown, K., "Calibration Studies; Collaborative Report by UK SPATE Users' Group", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[123] Loader, A. J., Turner, W. B. and Harwood, N., "Stresses in Vehicle Chassis Joints: A Comparison of SPATE with other Analysis Techniques", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[124] Machin, A. S., Sparrow, J. G. and Stimson, M. G., "The Thermoelastic Constant", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., pp. 3-1 SA, 1987, Feb. 17-18.

[125] Madakacherry, J. M. and Gunger, J. E., "Structural Development by Thermoelastic Stress Analysis of Plastic Models", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[126] McKelvie, J., "Consideration of the Surface Temperature Response to Cyclic Thermoelastic Heat Generation", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., pp. 5-1 SA, 1987, Feb. 17-18.

[127] Oliver, D. E. and Jaeger, P., "SPATE Applications in North America, Report on US SPATE Users' Group", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[128] Owens, R. H., "Application of the Thermoelastic Effect to Typical Aerospace Composite Materials", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[129] Potter, R. T., "Stress Analysis in Laminated Fiber Composite by Thermoelastic Emission", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[130] Pukas, S. R., "Theoretical Considerations for Determining Stress Intensity Factors Via Thermoelastic Stress Analysis", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[131] Reynolds, W. N., "Thermoelastic Stress Analysis and Thermography", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[132] Stanley, P. and Chan, W. K., "Assessment and Development of the Thermoelastic Technique for Engineering Applications: Four Years of Progress", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., pp. 3-1 SA, 1987, Feb. 17-18.

[133] Turner, S. R. and Pollard, N. G., "Application of SPATE to high Frequency Vibration Measurement of Aero Engine Components", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[134] Webber, J. M. B., "Principles of Infrared Measurements and Review of Insturmetation Techniques for Thermoelastic Stress Analysis", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., pp. 1-1 SA, 1987, Feb. 17-18.

[135] Wolfel, H., Kennerknecht, H. and Krapf, K. G., "Stress Analysis of Components of Industral Processing Plants: Combinaton of Thermoelastic Stress Analysis and Finite Element", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[136] Wood, A., Hurden, D. C. and Forsyth, P., "The Application of Thermoelastic Techniques in Determining Stress Distributions in Cast Tubular Joints", Second Int. Conf. on Stress Anal. by Thermoelastic Tech., 1987, Feb. 17-18.

[137] Cox, B. N. and Pettit, D. E., "Nondestructive Evaluation of Composite Materials Using the Stress Pattern Analysis by Thermal Emissions Technique", Proc. of the 1987 SEM Spring Conf. on Exp. Mechs., pp. 545-552, 1987, June.

[138] Stanley, P. and Chan, W. K., "The Application of Thermelastic Stress Analysis Techniques to Composite Materials", Proc. of the 1987 SEM Spring Conf. on Exptl. Mechs., pp. 536-544, 1987, June.

[139] Bakis, C. E. and Reifsnider, K. L., "Non-destructive Evaluation of Fibre Composite Laminates by Thermoelastic Emission", Review of Progress in Quantitative NDE, 1987, June 21-22.

[140] Valle, G., "Valutazione Delle Sollecitazione con il Metodo Della Termoelasticita Manutenzione e Affidabilita", Impianti, pp. 25, 1987, Mar./Apr.

[141] Oliver, D. E., "A Non-contact Instrument for Direct Stress Mapping", Proc. 33rd Int. Instrumentation Symposium", pp. 619-625, 1987, May 3-8.

[142] Lohr, D. T., Enke, N. F. and Sandor, B. I., "Analysis of Fatigue Damage Evolution by Differential Infrared Thermography", Proc. SEM Conf. on Dynamic Failure, 1987, Oct.

[143] Lohr, D. T. and Sandor, B. I., "Impact Damage Analysis by Differential Infrared Thermography", Proc. SEM Sonf. on Dynamic Failure, 1987, Oct.

[144] Finlay, B., "Implant Technology for the Arthritic Knee", Questor Symposium, 1987, Sept. 25-27.

[145] Ryall, T. G. and Wong, A. K., "Determining Stress Components from Thermoelastic Data-a Theoretical Study", Mechanics of Materials, vol. 7, pp. 205-214, 1988.

[146] Wong, A. K., Sparrow, J. G. and Dunn, S. A., "On the Revised Theory of the Thermoelastic Effect", J. Phys. Chem. Solids, vol. 49, pp. 395-400, 1988.

[147] Wong, A. K., Dunn, S. A. and Sparrow, J. G., "Residual Stress Measurement by Means of the Thermoelastic Effect", Nature, vol. 332, pp. 613-615, 1988, Apr. 14.

[148] Enke, N. F. and Sandor, B. I., "Cyclic Plasticity Analysis by Differential Infrared Thermography", Proc. of the VI Int. Cong. on Exp. Mechs., pp. 830-835, 1988, Jun. 7.

[149] Enke, N. F. and Sandor, B. I., "Cyclic Plasticity Analysis by Differential Infrared Thermography", Proc. of the VI Int. Cong. on Exp. Mechs., pp. 836-842, 1988, June.

[150] Boyce, B. R. and Oliver, D. E., "A Computerized Toolbox for the New Breed of Imaging Transducer", Proc. of the VI Int. Cong. on Exp. Mechs., pp. 819-824, 1988, June 6-10.

[151] Chan, S. W. K. and Stanley, P., "Thermoelastic Investigation of Stress Concentrations at Circular Holes in Thin Cylinders Subjected to Torsion", Proc. of the VI Int. Cong. on Exp. Mechs., pp. 567-577, 1988, June 6-10.

[152] Huang, Y. M. et al, "Determination of Individual Stress Components from SPATE Isopachics Only", Proc. of the VI Int. Cong. on Exp. Mechs., pp. 578-584, 1988, June 6-10.

[153] Kageyama, K., Ueki, K. and Kikuchi, M., "Thermoelastic Investigation of Stress Concentrations at Circular Holes in Thin Cylinders Subjected to Torsion", Proc. of the VI Int. Cong. on Exp. Mechs., pp. 567-577, 1988, June 6-10.

[154] Lesniak, J. R., "Internal Stress Measurements", Proc. of the VI Int. Cong. on Exp. Mechs., pp. 825-829, 1988, June 6-10.

[155] Oliver, D. E., "Vibration Pattern Imaging with SPATE", Proc. of the VI Int. Cong. on Exp. Mechs., pp. 830-835, 1988, June 6-10.

[156] Enke, N. F., Lesniak, J. R. and Sandor, B. I., "High-Temperature Stress Analysis Using Differential Infrared Thermography", Proc. Fifth Annual Hostile Enviroments and High Tempature Measurements Conf., SEM, pp. 4-7, 1988, Mar.

[157] Schmid, K. C., "Crack Detection, Measurement and Analysis by Differential Infrared Thermography", SEM Milwaukee Chapter, pp. 7, 1988, Mar.

[158] Bakis, C. E., Yih, H. R., Stinchcomb, W. W. and Reifsnider, K. L., "Damage Initiation and Growth in Notched Laminates under Reversed Cyclic Loading", Composite Materials: Fatigue and Fracture, vol. 2, pp. 66-83, 1989.

[159] Berry, D. J. and Everett, G. M., "Recent Advances in Instrumentation for Experimental Stress Analysis and Vibration Analysis", 12th WCNDT 89, 1989.

[160] Huang, Y. M., Rowlands, R. E. and Lesniak, J. R., "Simultaneous Stress Separation, Smoothing of Measured Thermoelastic Information, and Enhanced Boundary Data", , 1989.

[161] Huang, Y. M. and Rowlands, R. E., "Quantitative Stress Analysis Based on the Measured Trace of the Stress Tensor", , 1989.

[162] Huang, Y. M. and Rowlands, R. E., "Experimental Thermoelastic Solution of Boundary-Value Stress Analysis", , 1989.

[163] Leaity, G. P. and Smith, R. A., "The Use of SPATE to Measure Residual Stresses and Fatigue Crack Growth", Fatigue Fract. Engng. Mater. Struct., vol. 12, pp. 271-282, 1989.

[164] Zhang, D. and Sandor, B. I., "Thermographic Analysis of Stress Concentration in a Damage Cross-Ply Laminate", the 7th Symp. on Nondestr. Evaluation, pp. 155-166, 1989, Apr.

[165] Kageyama, K., Ueki, K. and Kikuchi, M., "Fatigue Damage Analysis of Notched Carbon/Epoxy Laminates by Thermoelastic Emission and Three Dimensional Finite Element Methods", Proc. 7th Conf. Comp. Mat. ICCM 7, 1989, Aug.

[166] Zhang, D. and Sandor, B. I., "Thermographic Analysis of Stress Concentrations in a Composite", Experimental Mechanics, vol. 29, pp. 121-125, 1989, June.

[167] Huang, Y. M., AbdelMohsen, H. H., Rowlands, R. E., "Determination of Individual Stresses Thermoelastically", , 1989, June 7.

[168] Barker, A. J., Jaeger, P. E. and Oliver, D. E., "Non-contacting Vibration Measurement: Role in Design and Industrial Applications", Stress and Vibration: Recent Developments in Industrial Measurement and Anal., vol. 1084, pp. 293-299, 1989, Mar.

[169] Bream, R. G., Gasper, B. C., Lloyd, B. E. and Everett, G. M., "Application of Vibration Pattern Imaging to Modal Analysis; A Comparison with Full-Field and Point Measurement Techniques", Stress and Vibration: Recent Developments in Industrial Measurement and Anal., vol. 1084, pp. 279-292, 1989, Mar.

[170] Chan, S. W. K and Tubby, P. J., "Stress Intensity Factors for Toe Cracks in Fillet Welded Joints-Finite Element Modeling and Thermoelastic Determination (Abstract Only)", Stress and Vibration: Recent Developments in Industrial Measurement and Anal., vol. 1084, pp. 116-118, 1989, Mar.

[171] Duncan, J. L. and Mackenzie, A. K., "Comparative Study of Stress Distributions in Human Bone under Simple and Complex Loading Conditions and as Modified by Insertion of a Metallic Prosthesis (Abstract Only)", Stress and Vibration: Recent Developments in Industral Measurement and Anal., vol. 1084, pp. 111-113, 1989, Mar.

[172] Dunn, S. A., Lombardo, D. and Sparrow, J. G., "Mean Stress Effect in Metallic Alloys and Composites", Stress and Vibration: Recent Developments in Industrial Measurements and Anal., vol. 1084, pp. 129-142, 1989, Mar.

[173] Enke, N. F., "Enhanced Theory for Thermographic Stress Analysis of Isotropic Materials", Stress and Vibration: Recent Developments in Industrial Measurement and Anal., vol. 1084, pp. 84-102, 1989, Mar.

[174] Everett, G. M., "Comparison between the Thermoelastic Method and other Experimental Techniques for Stress Measurement", Stress and Vibration: Recent Developments in Industrial Measurement and Anal., vol. 1084, pp. 54-58, 1989, Mar.

[175] Harwood, N. and Cummings, W. M., "Frequency-Domain Analysis Techniques Developed for SPATE Response Signals", Stress and Vibration: Recent Developments in Industrial Measurement and Anal., vol. 1084, pp. 143-158, 1989, Mar.

[176] Mackenzie, A. K., "Effects of Surface Coatings on Infrared Measurements of Thermoelastic Responses", Stress and Vibration: Recent Developments in Industrial Measurement and Anal., vol. 1084, pp. 59-71, 1989, Mar.

[177] Mountain, D. S. and Cooper, G. P., "Thermal Evaluation for Residual Stress Analysis (TERSA) - a New Technique for Assessing Residual Stress", Stress and Vibration: Recent Developments in Industrial Measurement and Anal., vol. 1084, pp. 103-110, 1989, Mar.

[178] Rogers, S. A., "Fatigue Cracking of Cooling Water Pipes", Stress and Vibration: Recent Developments in Industrial Measurement and Anal., vol. 1084, pp. 119-1128, 1989, Mar.

[179] Enke, N. F., "Thermographic Stress Analysis of Isotropic Materials", Ph. D Thesis, 1989, May.

[180] Huang, Y. M., "Determination of Individual Stresses from Thermoelastically Measured Trace of Stress Tensor", Ph. D Thesis, 1989, May.

[181] Zhang, D., "Anisotropic Damage: A Thermoelasticity Theory and Verifications", Ph. D Thesis, 1989, May.

[182] Zhang, D. and Sandor, B. I., "Thermographic Stress Analysis of Damage Evolution in Composite Joints (Extended abstract only)", the 1989 SEM Spring Conf. on Expt. Mech., pp. 13-17, 1989, May.

[183] Bakis, C. E. and Reifsnider, K. L., "The Adiabatic Thermoelastic Effect in Laminated Fiber Composites", J. Composite Materials, 1989, Oct.

[184] Sandor, B. I. and Zhang, D., "Thermographic Stress Analysis of Bonded Joints", ASNT Fall Conf., pp. 90-97, 1989, Oct. 9-13.

[185] Wong, A. K., "A Non-Adiabatic Thermoelastic Theory for Composite Laminates", RAE Tech. Report #TR90007, 1990.

[186] Zhang, D. and Sandor, B. I., "Damage Evaluation in Composite Materials Using Thermographic Stress Analysis, STP, 1990.

[187] Zhang, D. and Sandor, B. I., "A Theory of Thermoelasticity for Damage in Anisotropic Materials", Fatigue & Fracture of Engineering Materials & Structures, 1990.

[188] Zhang, D. and Sandor, B. I., "Advances in Thermographic Stress Analysis and Evaluation of Damage in Composites", 10th Symposium on Composite Materials: Testing and Design, ASTM, 1990, Apr. 24-25.

[189] Wong, A. K., "A Non-Adiabatic Thermoelastic Theory and the Use of SPATE on Composite Laminates", Int. Conf. Expt. Mech., 1990, Aug. 20-24.

[190] Huang, Y. M., Abdelmohsen, H. and Rowlands, R. E., "Determination of Individual Stresses Thermographically", Experimental Mechanics, vol. 30, 1990, Mar.

[191] Bakis, C. E. and Reifsnider, K. L., "Adiabatic Thermoelastic Measurements, Manual on Experimental Methods for Mechanical Testing of Composites", SEM.

[192] Frocht, M. M., "Photoelasticity", John Wiley & Sons Inc., vol. 1, pp. 215-291.

[193] Nutter, G. D., "Radiation Thermometry in the Aluminum Industry", .

[194] Potter, R.T. and Greaves, L. J., "The Application of Thermoelastic Stress Analysis Techniques to Fibre Composites", .

[195] Rowlands, R. E., Liber, T., Daniel, I. M. and Rose, P. G., "Higher-order Numerical Differentiation of Experimental Information", Experimental Mechanics.

[196] Saix, C., "Plasticite Experimentale par Thermographite de Surface", Thesis Univ. des Sci. et Tech. du Languedoc.

[197] Webber, W. R. S., "Techniques and Application for Thermoelastic Stress Analysis", .

[198] Welch, C. S., "Quantitative Non-destructive Testing", Annual Report to NASA Langley Research Center.

[199] Wong, A. K., Sparrow, J. G. and Dunn, S. A., "Recent Work on the Stress Dependence of the Thermoelastic Parameter", .

Back to top

---